SM6000 IFM Flow Meter – SMR12GGXFRKG/US-100

The IFM SM6000 is a magnetic-inductive flow meter built for industrial liquid monitoring, featuring a measuring range of 0.1–25 l/min, integrated temperature detection, and IO-Link communication for advanced diagnostics and control. With high accuracy, gold-plated contacts, and a robust stainless steel housing, it is ideal for applications involving conductive water-based or hydrous media.

Technical Specifications

Model: SM6000
Manufacturer: IFM
Product Series: SM Series
Sensor Type: Magnetic-inductive flow meter
Measuring Range: 0.1…25 l/min | 0.005…1.5 m³/h

Process Connection

• G 1/2 external thread (DN15, flat seal)
• Compatible with standard piping via adapter

Electrical Characteristics

• Operating Voltage: 18–30 VDC (SELV/PELV)
• Current Consumption: 95 mA @ 24 V
• Insulation Resistance: ≥100 MΩ (500 VDC)
• Protection Class: III
• Reverse Polarity Protection: Yes
• Power-On Delay: 5 s
• Measuring Principle: Magnetic-inductive
• Electrical Connection: 1 × M12 connector (A-coded, gold-plated contacts)

Output Configuration

• Total Outputs: 2 digital, 1 analogue
• Digital Outputs: 2 (PNP/NPN, NO/NC configurable)
• Analogue Output:
  • 4–20 mA (Max. Load: 500 Ω)
  • 0–10 V (Min. Load: 2000 Ω)
  • Scalable analogue and pulse output
• Output Signal: Switching, analogue, pulse, IO-Link
• Pulse Output: Flow rate metering
• Short-Circuit / Overload Protection: Yes (pulsed)

Measuring & Setting Ranges

• Flow Measuring Range: 0.1…25 l/min | 0.005…1.5 m³/h
• Display Range: –30…30 l/min | –1.8…1.8 m³/h
• Resolution: 0.02 l/min | 0.002 m³/h
• Set Point (SP): 0.25…25 l/min | 0.015…1.5 m³/h
• Reset Point (RP): 0.1…24.9 l/min | 0.005…1.495 m³/h
• Analogue Start Point (ASP): 0…20 l/min | 0…1.2 m³/h
• Analogue End Point (AEP): 5…25 l/min | 0.3…1.5 m³/h
• Step Size: 0.02 l/min | 0.002 m³/h

Volumetric Flow Monitoring

• Pulse Value: 0.00001…30,000 m³
• Pulse Length: 0.01…2 s

Temperature Monitoring

• Temperature Range: –20…80°C
• Resolution: 0.2°C
• Set/Reset Points: –19.2…80°C | –19.6…79.6°C
• Analogue Output Range: –20…80°C (configurable start/end)
• Step Size: 0.2°C
• Dynamic Response: T09 = 20 s (Q > 1 l/min)

Accuracy & Repeatability

• Flow Accuracy: ±(0.8% MW + 0.5% MEW)
• Flow Repeatability: ±0.2% MEW
• Temperature Accuracy: ±2.5 K (Q > 1 l/min)

Response Times

• Flow Response Time: 0.15 s
• Delay (dS/dr): 0…50 s
• Damping (dAP): 0…5 s

IO-Link Communication

• Interface Type: IO-Link v1.1
• Transmission Type: COM2 (38.4 kBaud)
• SDCI Standard: IEC 61131-9
• Profiles:
  • Smart Sensor: Process Data, Device ID, Diagnostics
• SIO Mode: Supported
• Master Port Type: A
• Process Data: 3 analogue, 2 binary
• Minimum Cycle Time: 5 ms
• Device ID (Default): 569

Environmental Conditions

• Ambient Temperature: –10 to +60°C
• Storage Temperature: –25 to +80°C
• Medium Temperature: –10 to +70°C
• Enclosure Rating: IP67
• Pressure Rating: 16 bar / 1.6 MPa
• MAWP (CRN-rated): 17.7 bar
• Conductivity: ≥ 20 µS/cm
• Viscosity: < 70 mm²/s
• MTTF: 162 years

Mechanical Design

• Weight: 544 g
• Dimensions: Ø 54 mm × 110 mm
• Housing Type: Cylindrical
• Housing Materials: Stainless steel (316L), PBT-GF20, PC, FKM, TPE
• Wetted Materials: Stainless steel (316L), PEEK, FKM

Display & Diagnostics

• Display Unit: Alphanumeric, 4-digit
• Green LEDs (6): l/min, m³/h, l, m³, 10³, °C
• Yellow LEDs (2): Switching status
• Programming Interface: Via display or IO-Link

Compliance & Approvals

• EMC: DIN EN 60947-5-9
• Shock Resistance: DIN IEC 68-2-27 (20 g / 11 ms)
• Vibration Resistance: DIN IEC 68-2-6 (5 g / 10…2000 Hz)
• CPA Approval: Model 001MI
• PED: Sound engineering practice (Group 2 fluids by default)

Key Features & Benefits:

✅ Highly Accurate Magnetic-Inductive Technology: Reliable flow and temperature measurement for water-based media.

✅ Pulse, Analogue & IO-Link Outputs: Flexible integration into modern control systems.

✅ Integrated Volumetric Totaliser: Monitor cumulative flow directly from the unit.

✅ Advanced Temperature Monitoring: Dual sensing functionality in one device.

✅ Stainless Steel Construction: Corrosion-resistant and robust for long-term use.

✅ Smart LED Display: Clear multi-unit readout and quick diagnostics.

📦 Order Today for Fast UK & Europe Delivery!

At Drive Outlet Megastore, we offer the best IFM SM6000 prices, with same-day and next-day shipping across the UK & Europe.

Need help choosing the right IFM flow meter?

Contact Us for expert guidance from our experienced team.